844-4-MY-TEMP

STEP 1: CHECK FOR PARTS

One (1) Master Control Unit (MCU)

Two (2) Wireless Remotes

One (1) MCU Power Cord

One (1) Bluetooth HUB

Four (4) Plastic Air Tubes

One (1) HUB Power Cord

STEP 2: INSPECT AND ASSEMBLE

2.1 – RELEASE FOUNDATION WIRES

Detach fabric straps and extend foundation wires. The wires are attached to the straps, so pull gently to avoid damaging internal components.

2.2 – PLACE THE FOUNDATION

Lay the foundation on top of the bed frame, placing the foundation so that the wires are at the head of the frame. Ensure the wires exit the underside of the frame and are not folded, crossed, or pinched.

2.3 – CONNECT POWER SOURCE

  • Plug power cord into Master Control Unit (MCU)
  • Plug the left and right side foundation wires into the appropriate inputs on the rear of the MCU. Note: you should hear these click and lock into place.
  • Turn on the main power switch located on the rear of the MCU.

“Setup was easy and only took minutes!”

STEP 3: REMOTE CONFIGURATION

REMOTE CONFIGURATION

Remove battery cover on the rear of the remote. Select which side of the bed each mattress will operate in regards to climate control settings. R=Right side, L=Left side, B=Both sides. Place batteries in the remote and replace cover.

STEP 4: CHECK SYSTEMS

TEST AIR FLOW

Using one remote, press the power button to wake up the remote. Press and hold the power button for two seconds to enable “Vent mode.” Pass your hand over the holes in the foundation to feel for airflow. To properly test the climate control functions, press the “up” arrow key until the remote is set to high heat (a red LED screen will appear). Repeat this process with the other remote and let high heat run for two minutes while completing setup. DO NOT ATTEMPT TO REMOVE OR ALTER VENT HOLES.

STEP 5: MATTRESS PLACEMENT

5.1  VERIFY VENT HOLES

Check each of the 4 vent holes (2 for Twin XL) to ensure no packing materials or other foreign objects are blocking air flow.

5.2 – PLACE THE MATTRESS

Align and insert the plastic air tubes into the holes located in the foundation. Carefully place the mattress on top of the foundation, making sure the plastic air tubes are lining up with the vent holes in the mattress. When properly placed, the air tubes are firmly held in place. The mattress and foundation should lay flat with all edges aligned.

5.3 – SET CLIMATE CONTROL

Take each remote, and using the arrow up and arrow down keys, select the desired temperature setting.

Connecting The SleepFresh App

1: DOWNLOAD AND OPEN APP

 

Locate the SleepFresh HUB and plug into a power source. When you first open the SleepFresh app, you will be prompted to enter the unique pairing code that is attached to your SleepFresh HUB. Enter the code when prompted to pair your connected device to the SleepFresh HUB. 

 

1: CONFIGURE / PERSONALIZE

2.1 – SELECT YOUR SIZE

Select the size on the screen that represents the size bed you purchased.

2.2 – ASSIGN SIDES

If sleeping alone, simply select the “only one sleeper” option.

YOU’RE ALL SET!

You can now choose from 11 different temperature settings. Try them all and see what works best for the way you sleep.